All products, Asbestos

SPS FIBER SEALS

€375,00

Permanent sealant for asbestos fibers, water-based and permeable.

Categories: All products, Asbestos Tags: Moisture barrier, Radon, Radon protection

Fast fragtpris kun DDK 150,-

Ingen-risiko penge-tilbage-garanti!
Sikker betaling

Guaranteed Safe Checkout

Description

SPS Fiber Sealer is a huge innovation in the fight against asbestos.

SPS Fiber Sealer is a water-based product that permanently seals asbestos fibers to surfaces of all kinds. The seal is permanent (cannot withstand mechanical wear) and is also highly permeable. The asbestos sealer can subsequently be quality assured with a UV lamp as the sealer contains UV material.

FORCE TECHNOLOGY has documented the effect of SPS Fiber sealer for asbestos on different surfaces, all tests are available on the product page here

SPS Fiber sealer for asbestos is applied with hand/weed sprayer to uniform visible layer. Application can be repeated after 30-60 min if additional coats are desired.

FACTS:

Packaging: 5 Ltr concentrated.

Color: White, hardens up transparent.

Curing time: 1-3 hours

Dilute with water at a ratio of 1:3 / 1:5 depending on surface area / absorbency

Coverage: 8-10m2 per diluted liter.

The product does not contain epoxy or isocyanates and does NOT require an epoxy course.

MAL code: 0-1

Further information

Silane-based two-component sealing membrane with very wide adhesion properties, for sealing against penetration of radon in building components such as floors and walls.

SPS Radon Block can, if there are no other entry points for radon than through the floor, seal 100% against radon. At the same time, while sealing for radon, it also seals for moisture, as SPS Radon Block is not diffusion-open.

If there are any moisture problems, these should always be taken into account before sealing for radon. We are always helpful with advice and guidance and can always refer to experienced consultants in the field – throughout the country.

Sealing for radon with SPS Radon Block is a permanent solution and does not need to be redone unless the sealant wears off. This provides peace of mind and assurance that the problem has been addressed for many years to come.

If you choose a radon sealing or radon protection with SPS Radon Block, you choose a solution that is economical, manageable, environmentally friendly, and time attractive compared to other similar solutions on the market. We offer both execution of radon sealing in main and sub-contracting, as well as sale of SPS Radon Block.

SPS Radon Block is also particularly suitable for sealing of bla. walls and ceilings, and can subsequently be painted over.

Product sheet/Technical data sheet

Download SPS Radon Block Product Sheet.
Download SPS Radon Block Technical Datasheet.

Test report.

Test report – HM Ing. Parcelhus 2010
Test report – DMR A/S Parcelhus 2019

Test report HM Ing. Bilag A
Test report HM Ing. Bilag B